Home ANRITSU | Signal Spectrum Analyzers Field Master™ MS2080A
ANRITSU | Signal Spectrum Analyzers

Field Master™ MS2080A

The Field Master™ MS2080A is a compact, high-performance handheld RF spectrum analyzer supporting frequency ranges up to 4 GHz or 6 GHz. With real-time spectrum analysis (RTSA), interference hunting, 5G/LTE base station testing, and optional cable & antenna analysis, it delivers robust and flexible RF measurements in both field and lab environments—all under 9 lbs..

  • Detail
  • Special Features
  • Specification

Designed for RF professionals working in 5G, LTE, broadcasting, defense, and private wireless networks, the Anritsu MS2080A delivers premium RF measurement capabilities in a highly portable form factor. From general spectrum analysis to advanced interference hunting and base station verification, it supports critical deployment and maintenance tasks in both indoor and outdoor settings.

Its real-time spectrum analysis feature (RTSA) with a 40 MHz bandwidth captures elusive burst signals in dynamic environments, while the tracking generator simplifies testing of filters, cables, and frequency conversion devices. With sweep speeds up to 45 GHz/s, it enables rapid scans for efficient troubleshooting.

The MS2080A also supports 5G NR and LTE base station demodulation, allowing telecom engineers and contractors to measure signal quality and verify installations in the field. Its high dynamic range, ultra-low DANL, and superior amplitude accuracy ensure precise results in even the most challenging RF conditions.

  1. Frequency Range Options: 9 kHz–4 GHz (Opt. 704) or 9 kHz–6 GHz (Opt. 706).

  2. Fast Sweep Speed: 45 GHz/s for quick signal capture.

  3. High Sensitivity: DANL < –165 dBm with preamp.

  4. Real-Time Spectrum Analysis (RTSA): Optional 40 MHz bandwidth for transient and burst signal detection.

  5. Signal Demodulation: Supports 5G NR, LTE, and AM/FM modulation quality.

  6. Tracking Generator: Built-in with tracking, offset tracking, and CW modes for filter and cable testing.

  7. Dynamic Range: >105 dB minimum at 2.4 GHz.

  8. Geolocation Tools: Integrated features for interference source hunting.

  9. Optional Cable & Antenna Analyzer: Add S331P Site Master capabilities to same unit.

  10. Portable and Rugged: Under 4 kg with kickstand and protective case for field or bench use.

 

Parameter Value
Frequency Range 9 kHz–4 GHz (Opt. 704), 9 kHz–6 GHz (Opt. 706)
Sweep Speed 45 GHz/s
Phase Noise –95 dBc/Hz @ 1 GHz, 100 kHz offset
DANL < –165 dBm (with preamp)
Max Input Signal +30 dBm
Input Damage Level +37 dBm (5 W)
Dynamic Range >105 dB (at 2.4 GHz, typ.)
Amplitude Range DANL to +30 dBm
Amplitude Accuracy ±1 dB (±0.5 dB typical)
Tracking Generator Output –45 dBm to +9 dBm
Frequency Accuracy ±0.28×10⁻⁶ (–10 °C to +55 °C) plus aging
Frequency Aging ±1.0×10⁻⁶ per year
RBW (Sweep Mode) 1 Hz to 5 MHz
RBW (Zero Span Mode) 10 Hz to 20 MHz
RTSA Bandwidth (Optional) 40 MHz
Demodulation Support 5G NR, LTE, AM/FM